![]() Recommended fix: Check and reconnect the chain in the toilet tank. RELATED: The Best Toilet Plungers for the Bathroom Problem: The handle on the toilet just wiggles but doesn’t flush. If you’ve freed the clog, the water will drain-it usually takes just one or two attempts to free a clog. After eight to 10 pumps, lift the plunger away from the bottom of the bowl. Forceful plunging is likely to splash dirty water all over the bathroom. Often, just plunging will fix it.ĭon’t be overly enthusiastic. Then use a rhythmic push-and-pull pumping motion to create pressure in the drain and free the clog. Simply insert the plunger into the bowl while it’s still full of water, pressing the mouth of the plunger firmly against the opening at the bottom of the bowl to form a seal. Recommended fix: Plunge the toilet to clear the clog.Ī clogged commode will cause the bowl to overflow onto the bathroom floor, but the fix-which happens to be the most common of all toilet repairs-doesn’t have to ruin your day.Ĭlearing the clog is super simple, and you probably have a toilet plunger already on hand. Photo: Problem: The toilet bowl is overflowing. ![]() RELATED: The Best Toilets of 2021 How to Fix a Toilet: Simple Solutions to the Most Common Issues Bowl-to-floor seal: Commonly called a “wax ring,” this is the soft, moldable seal that fits between the bottom of the toilet and the drainpipe to keep water from leaking out under the toilet.Handle: The outwardly visible lever that raises the flapper in the tank when the toilet is flushed to allow water to run into the bowl.Depending on the tank components, this may also be called a “ball cock” or a “fill valve.” Float: A lightweight component in the tank that rises with the water level and shuts off the water flow when the tank is full.Flapper: The seal between the tank and the bowl that lifts and allows the water to rush into the bowl when the toilet is flushed.Trap: Located beneath the bowl, the trap is a curved section of the drain that keeps the water in the bowl from running out until the toilet is flushed.Tank: This toilet part holds enough water to flush the contents of the bowl.Here are the various parts you may encounter when repairing a toilet: The water pressure forces the contents of the bowl to flow out of the toilet through the drain.Īfter the flush, the flapper settles back into place, and clean water from a water supply line flows into the tank until the water level reaches a predetermined point, which causes the water flow to cease until the next flush. When someone depresses the toilet handle, the seal between the tank and the bowl (called a flapper) lifts, and water from the tank floods into the bowl. Water fills the toilet bowl about halfway, while additional water is stored in the tank. The average toilet works via gravity and a siphoning effect.
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |